ETPS specialise in programmable power supplies and test systems. We offer a wide selection of products which cater for almost any power, voltage or current requirement.  Specific ranges include programmable AC & DC sources, battery/capacitor emulators, four quadrant grid simulators for V2G testing, electronic loads, battery/capacitor cyclers and drive cycle test equipment.

At the exhibition we will be showcasing our G5-RSS bidirectional DC power system range. With two current ranges for high accuracy, the G5-RSS is ideal for cycling energy storage devices. The module’s ultra-fast dynamics with switchable capacitance also allows accurate simulation of batteries and capacitors. A current step between 90% sourcing to 90% sinking can be as quick as 50us, enabling high speed drives to be supplied. Modules are available from SELV models starting at 60V/338A, ranging up to 3000V/6MW at tens of thousands of amps.

An embedded function generator enables V/I and V/W relationships to be programmed against time, to accurately simulate a discharging fuel cell. Users can programme a current ripple up to 10kHz, commonly used for EIS research. Multi-module systems based around a centre tapped earth are possible, creating a +/- voltage output. Ideal for testing power systems used in ships and aircrafts.

If nothing in our standard range is suitable then we’ll look to provide a bespoke solution. We also offer a comprehensive selection of rental AC and DC power systems, at a wide range of powers and voltages.

FEV has always pushed the limits. 

FEV is an internationally recognized leader of innovation across different sectors and industries. Professor Franz Pischinger laid the foundations by combining his background in academia and engineering with a great vision for continual progress. The company has supplied solutions and strategy consulting to the world's largest automotive OEMs and has supported customers through the entire transportation and mobility ecosystem. 

 
As the world continues to evolve, so does FEV. 

That’s why FEV is unleashing its technological and strategic expertise into other areas. It applies its forward thinking to the energy sector. And its software and system know-how will enable the company to lead the way making intelligent solutions available to everyone. FEV brings together the brightest minds from different backgrounds and specialties to find new solutions for both current and future challenges.  

But FEV won’t stop there.  

Looking ahead, FEV continues to push the limits of innovation. With its highly qualified 7,000 employees at more than 40 locations globally, FEV imagines solutions that don’t just meet today’s needs but tomorrow’s. Ultimately, FEV keeps evolving – to a better, cleaner future built on sustainable mobility, energy and software that drives everything. For the companies’ partners, its people and the world. #FeelEVolution 

Ford of Britain has been sales leader in the U.K. for commercial vehicles for 57 consecutive years. The U.K. is Ford's third-largest global market and accounts for around 30 per cent of total Ford vehicle sales in Europe. Ford is pursuing leadership positions across mobility and electrified vehicles, launching nine all-electric vehicles by 2024. Ford directly employs around 7,000 people in the U.K., with thousands more employed in its extensive dealer network. Ford's Dunton Campus in Essex is the home of its European commercial vehicle business group, the Ford of Britain national sales company, Ford's banking arm - Ford Credit Europe - and powertrain engineering. UK manufacturing operations export 85 per cent of engines and transmissions produced to more than 15 countries on six continents - valued at £2.1 billion annually.

Fortescue ZERO exists to accelerate the advantage and impact of our clients.

We’re a technology and engineering services business, applying world-class technical innovation, engineering, testing and manufacturing services to deliver energy efficient performance.

Our people are experts in electrification and battery technology, aerodynamics and thermodynamics, performance and specialist low-volume manufacturing. We operate across a wide range of sectors from automotive and motorsport, aerospace and defence, rail, off highway, and energy. We work in close collaboration with our customers and partners to meet the key engineering challenges of the 21st century – focusing on mobility, energy storage sustainability and efficiency.

Fuel Cell Systems Ltd. is a leading UK renewable energy company specialised in sourcing, designing, integrating and distributing bespoke Hydrogen Fuel Cell solution’s for your specific power needs. We offer a wide range of hydrogen systems sized as appropriate for your needs – we design, build and support electrolyser systems for hydrogen production and storage. We deliver hydrogen products for: depot fleets – cars, vans, HGV’s, buses, emergency vehicles; off-road fleets – plant equipment, off-road vehicles, generators, airport and port GSE; and static stations. We also provide off-grid fuel cell power for a broad range of applications including: CCTV Towers, environmental Monitoring, wildlife Filming, traffic, signage and water Flow Measurement.

Fusion Processing Ltd provides a complete Automated Drive System, consisting all sensors, comms modules and control module required to convert a vehicle to Autonomous Level 4. All software is created in house by Fusion.

The company is already ISO9001 certified and expects to achieve Process Accreditation for ISO26262 and ISO21434 in 2024.

Understanding thermal runaway and off-gassing is crucial to development in the battery sector. At Gasmet we design and manufacture world-class gas analysis systems and emission monitoring solutions for a variety of processes including battery related gas detection.

With the large amount of gases of interest within battery testing, our FTIR portable analysers can detect 50 gases at any one time from NOx, ammonia, hydrogen chloride, formaldehyde and carbonates in both ambient and hot environments.

Come and talk to us about how Gasmet can support your research and development in this field.

GeoPura is accelerating the adoption of sustainable energy through zero-emission fuels and clean power technologies. It’s HPU harnesses green hydrogen to provide zero-emission electricity, augmenting the grid where the local supply is insufficient and replacing diesel generators delivering reliable, large-scale power, with the only byproduct being water. Working with globally recognised partners, GeoPura is reducing emissions and powering net-zero.

With hubs in Sheffield, Nottingham and Newcastle upon Tyne in the UK, GeoPura is mass manufacturing HPUs alongside partner Siemens Energy and investing in the production of green hydrogen to fuel the units.

GeoPura plans to deploy a fleet of over 3,600 HPUs by 2033, providing clean, low-cost reliable power, and displacing more than ten million tonnes of CO2 emissions through their operation over their life.

Already proven by multiple high profile deployments, including recently powering the live TV broadcast of the DP World Golf tour, providing EV charging for the MOD and powering the shutdown of a Uniper power station in the UK, companies such as The BBC, Balfour Beatty, National Grid and many more are already reducing their carbon footprint and contributing to a more sustainable energy system today.

Geospatial Insight is dedicated to making a positive impact on the environment and driving sustainable change. As a leading company in advanced environmental data analytics and solutions, we are committed to helping businesses, organisations, and communities transition towards a greener and more sustainable future.

We offer a comprehensive suite of products and services designed to meet the specific needs of our clients. Our solutions include emissions detection and monitoring, EV and solar location planning optimisation, air quality monitoring and risk intelligence for natural disaster and regulatory compliance support.

At Cenex Expo 2024 we will be demonstrating our LOCATE EV platform which brings together critical datasets and intuitive functionality to facilitate EV chargepoint network planning across complex areas.

GESIPA is a leading developer and manufacturer of blind riveting technology and system solutions. 

GESIPA will be displaying their successful new range of products for the EV and Lightweight manufacturing industry. These include specially designed Rivet Nuts and Studs such as the SoftGrip, G-Sealed, LightWeight and HighStrength, as well as rivets MegaGrip and PolyBulb, to name a few. GESIPA will also be promoting their range of tooling for manual, semi and fully automated systems, therefore offering the complete riveting solution. 

Established in 1994, G&P is a world-leading provider of quality management services to the manufacturing industry, primarily in the automotive, aerospace and off-highway sectors.

 G&P provides efficient and effective solutions to control and eliminate disruptions throughout the manufacturing processes, supporting the drive for zero defects. G&P works throughout the supply chain providing audits and supplier development to ensure assurance of supply, on time, in full.

 With more than 1,000 employees, G&P’s team, methods and systems, including its QTrak software, are seamlessly integrated into the operations of world-leading OEMs and their key suppliers at over 250 manufacturing facilities around the globe.

Grainger & Worrall continues to be at the global forefront of castings development and innovation. Including the leading provider of high quality, total castings solutions across the automotive, motorsport, energy and wider transport sectors. 

About GridBeyond

GridBeyond's vision is to deliver a global zero carbon future. By leveraging AI, we innovate and collaborate with our customers to create optimal value from energy generation, demand and storage to deliver a zero-carbon future. By bridging the gap between distributed energy resources and electricity markets, GridBeyond’s technology means every connected asset – whether utility-scale renewables generation, battery storage, or industrial load – can be utilized to help maximize opportunities and enhance the grid. 

What is GridBeyond doing in the project

GridBeyond will oversee energy management and aggregation services through its flexible Energy Management System (EMS).

H V Wooding specialises in the fabrication of high-performance components for the Hybrid & Electric vehicle market, including the custom-manufacture of Busbars for battery and drivetrain applications, as well as Motor laminations and Core packs.

We collaborate with our clients from prototype to series production, providing added value services and identifying optimal solutions that meet their specific requirements.

Our extensive range of in-house capabilities guarantees the most efficient method of manufacture, ensuring the highest quality and reliability of our service

Our comprehensive manufacturing services range from prototype development to volume production, utilizing various techniques including Wire Erosion, Laser Cutting, Presswork & Tooling, Assembly, Powder Coating and Electroplating.

Hallmark Engineering Group, a privately-held parent company, pioneers integrated engineering solutions across industries with a commitment to enhancing client value through our "In Engineering We Trust" philosophy. We excel in comprehensive engineering design and development, facilitating the progression of intricate systems from initial concept to mass production and specialised manufacturing.

Our subsidiaries, Hadfield Services and EES Solutions, play pivotal roles in our mission. Hadfield Services specialises in harnesses, mass reflashing, and prototype development, providing precise and high-quality products. EES Solutions offers specialised engineering consultancy and technical services, ensuring our clients receive expert guidance and support.

Hanger19 develop sustainable transport systems focusing on EV charging systems and the energy markets. We have onboarded more V2G chargers to their back office than any other provider. We have a strong existing client base for our charger and back office services which include a wide range of leading utilities, public and private sector clients.

All our products are developed in-house. We write our own software and produce our own Duo and Trio charging solutions and load management products to support the EV charging market. This means we have full control over any changes which are required, with regular updates and new features produced to keep the product benefits ahead of the market. Customers also have the chance to commission additional features for development as specific costed projects to meet their specific needs.

Innovation plays a crucial role in our business. We are constantly developing new ideas and products, both for our own solutions and helping our clients to resolve complex technical challenges to develop their own solutions. This includes our unique AC V2G compatible commercial charger, which is being showcased at this event and on the V2VNY trial as part of the InnovateUK V2G cohort.

HARTING develops and manufactures charging equipment for electric and plug-in-hybrid vehicles, including car charging cables and e-mobility infrastructure systems.

Our charging cables comply with all worldwide standards (IEC 62196-2 & 3) for charging with AC Mode-2 and Mode-3 single and three-phase solutions plus DC high power rapid charging, which are available in various AC/DC power ratings.

In addition, HARTING manufacture industrial and electronic connectors, Ethernet switches and charging plugs and sockets for use in EV distribution networks for e-mobility infrastructure. We also offer industrial connectors for battery storage applications, energy saving connectivity solutions and magnet systems for automotive actuators.

Hewland has been a trusted provider of complete transmission solutions and precision components for over 60 years. Working with top-tier companies across diverse industries, we leverage our expertise in design, test, development, manufacturing and assembly to rapidly deliver full-scale projects.

Our offerings cater to a wide array of sectors, including motorsport, high-performance automotive, aerospace, and commercial, in both EV and ICE applications. As part of the Hero Motors Group, we scale manufacturing to volume transmissions and components for the EV market.

Hexagon’s Manufacturing Intelligence division empowers makers to innovate and create without limit. Our solutions support optimisation throughout the product lifecycle, freeing creators to make better products in new innovative ways, for people and planet.

Whether you invent, design, manufacture, test or service products, Hexagon’s Manufacturing Intelligence division empowers you to create without limit, with unrivaled CAE, CAD/ CAM and metrology software and hardware solutions.

Our technologies remove the barriers to what’s possible and empower makers to redefine the world we know through manufacturing innovation. From concept to end of life, our solutions deliver optimisation across the entire value chain, transforming design, simulation, testing, material selection, manufacturing design planning, production, inspection and real-world performance.

HiSpeed Ltd. designs, develops and tests tailor-made, highly efficient compact electric powertrains, drives, machines and inverters. The fundamental principle throughout our operations is to promote quality sustainable transportation for all. Our vision is to eliminate transport CO2 emissions completely, by providing state-of-the-art, carbon-neutral electric propulsion components. 

From the initial concept through to implementation, we use our innovative technology to develop sustainable products. We use less raw materials in our drive units, from prototype to mass production, and every detail is optimised using powerful multi-physic and multi-objective optimisation algorithms.

HORIBA provides an extensive array of measurement and analysis solutions for the automotive industry. As a leading supplier of engine test systems, driveline test systems, brake test systems, wind tunnel balances and emissions test systems, HORIBA is your trusted partner, combining cutting-edge technology with decades of skill and expertise. Our diverse portfolio of test and analysis technologies range from combustion engine monitoring to electrolysis, carbon utilisation, fuel cells, hydrogen test solutions, and battery life cycles, supporting the transition and journey as we strive for a carbon-neutral future. Our reliable and innovative solutions support quality control analysis, battery materials processing, and research and development, as well as the manufacture of next generation battery technology, right through to product development, conformity, verification, and certification within the automotive industry. 

HORIBA MIRA is a global provider of automotive engineering, research and test services, with over 75 years of experience in developing some of the world’s most iconic vehicles. We have been at the forefront of hybrid and electric vehicle systems solutions for more than a decade, working in collaboration with vehicle manufacturers and suppliers around the world to provide comprehensive support ranging from technology development and individual product tests through to full-vehicle design, development and build programmes.

HVS (Hydrogen Vehicle Systems) is a UK company founded 2017. From innovative powertrain design to ground up production, HVS aims to disrupt the commercial vehicle industry by being an early mover with the most advanced, all–new zero emission HGV. Leading the way in hydrogen electric vehicle design, HVS is pioneering cutting-edge solutions that will decarbonise one of the heaviest polluting sectors worldwide. Combining unique design, efficiency, and performance; HVS will provide the ultimate driver experience at lower costs and lowest emissions.   

Based on HVS' conservative sales projections, by 2030 the new UK fleet of hydrogen HGVs displacing diesel vehicles could prevent more CO₂ and noxious air emissions than the reported on-ground annual emissions of Heathrow airport.